Ina Page Awning December 03rd, 2019 - 00:49:48
Awning manufacturers have a shorthand jargon that succinctly describes their awnings characteristics, quality, function, even style. Knowledge is the key to having an efficient (and enjoyable) online shopping experience for retractable awnings. These simplified common terms can help you know in advance what youre looking at, so you know how to find what you want. Terms: Parts A lateral arm retractable awning is an awning which can be rolled up and closed; unlike fixed awnings and canopies, a retractable awning has no support posts. A retractable awning has an intrinsically simple design: o Frame - the skeleton of the awning; the frame is comprised of the mounting bar, arms, and roller tube. Mounting bar - the base of the retractable awning which is mounted in place; when the awning is retracted, the awning fabric rolls around the roller tube attached to the mounting bar.
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
The urge to create something new and eye-catching on the blank slate of a home is powerful. As is the urge to save some money and maximize ones efforts. Whether its a change to landscaping, a roof garden, or a casual seating area for customers, retractable awnings or drop screens are an ideal project for do-it-yourselfers because they make a very dramatic difference with relatively little effort. The Planning Stage A major part of installing a retractable awning is finding the perfect place to install it. Retractable awnings are much easier to install than fixed awnings or canopies because they are only mounted on a wall - no need to dig post holes or put in a foundation or grounding - so they can be installed over existing pavements, patios, decks, hot tubs, and gazebos, as well as doors and windows. Retractable awnings are suited to any location where sun, glare, UV rays, or light rain protection is required.
In addition to the practical reasons, Europe has had a long aesthetic tradition with awnings, so retractable awnings are a natural part of any home design, and that organically led into creative and adventurous designs, which made using awnings even more appealing. The US, on the other hand, has had historically cheap and accessible energy, with widespread air conditioning and central air systems. Combined with suburb-motivated home designs, neither energy nor aesthetics has given a compelling reason to include retractable awnings on homes as a standard practice. Energy shortages and price increases in the 1970s, though, did begin bringing retractable awnings to the popular mind as a functional solution for energy efficiency.